Pazzles Craft Room Login

Stopping and Starting Points Not Matching Up

Have you ever been concerned with your stop and starting points not meeting up when you cut your project? The first thing that you will want to check is to make sure that you’ve done the updates from our website. The next step will be to take a look at your speed setting and pressure. The combination of the two can really affect the start and stop points. As the Inspiration cuts, the blade is swiveling inside of the blade holder. If there is an excessive amount of pressure down on the mat or the speed is too high then the blade can’t swivel properly and as a result it will not be able to complete the cut and come back to the starting position. Start by reducing the pressure and back down on the speed. If you need help figuring out the correct settings, try using our Settings Guide which can be found in the “Cutting 101” forum or in our video tutorials titled Determine the Blade Length & Pressure under “The Fundamentals” section.

Built on aMember Pro™ membership software